Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
cancel
Showing results for 
Search instead for 
Did you mean: 

NetServer 5/100 LH

CA1182458
Occasional Visitor

NetServer 5/100 LH

When I startup my system it seems to be in a loop. I gets to the Window 2000 startup screen, but the progress bar stops half way. Whenever I interrupt by pressing 'F' keys, I receives a 'Stop Error' 0x0000007B Inaccessible_Boot_Device, which indicates to: "Check viruses on your computer and to check the hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer." I have tried to start the system in 'Safe Mode' w/ & w/o command prompt, plus Last Known good; Also I can't run 'Setup' to try and configure hard drive nor can I run CHKDSK. This is a RAID Server. Please tell me how to get beyond this point so I may retrieve the data...thanks.
1 REPLY
Ali
HPE Pro

Re: NetServer 5/100 LH

Hi There,

 

looks like a problem with MBR.

 

boot the server from DOS floppy with Fdisk utility and Run Fdisk/Mbr to fix the issue.

 

check this article for more information :

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=45937&prodTypeId=15351&objectID=lpn14418

 

Hope the information provided is helpful. Click the Kudos Star! to recognise the same.
ITRC Style Sitemap.

 

thanks,

Aftab

 

I work for HP
Looking for a quick resolution to a technical issue for your HP Enterprise products? HP Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details