HPE Community
Netservers
1752569 Members
5289 Online
108788 Solutions
New Discussion

NetServer LH6000r Slow After Firmware Upgrade and Conversion from U2 to U3

 
wfitzpatrick850
New Member

‎11-10-2011 11:48 PM

‎11-10-2011 11:48 PM

NetServer LH6000r Slow After Firmware Upgrade and Conversion from U2 to U3

I have an issue with my netserver LH6000r after performing a firmware upgrade on the integrated netraid and system firmware.

Also I converted from U2 to U3. Windows installation was extremely slow, it use to take 20 min max is now taking hours. Any ideas?

0 Kudos
2 REPLIES 2
Ali
HPE Pro

‎09-17-2012 03:59 AM

‎09-17-2012 03:59 AM

Re: NetServer LH6000r Slow After Firmware Upgrade and Conversion from U2 to U3

Hi,

 

This could be due to System BIOS version.

 

Upgrade conversion U2-U3 BIOS version and see if it makes any difference.

 

 

thanks,

Aftab

 

How to Say Thanks...! Click on STAR Kudos

I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details

Accept or Kudo

0 Kudos
Ali
HPE Pro

‎09-17-2012 04:02 AM

‎09-17-2012 04:02 AM

Re: NetServer LH6000r Slow After Firmware Upgrade and Conversion from U2 to U3

 

Please check this system BIOS version:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=50440&swItem=ns-18265-1&mode=3

 

 

I work for HPE
Looking for a quick resolution to a technical issue for your HPE products? HPE Support Center Knowledge-base – Just a Click Away!
See Self Help Post for more details

Accept or Kudo

0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.