Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

Netserver E50 and USB?

 
Highlighted
Occasional Contributor

Netserver E50 and USB?

Hello,

My E50 Netserver has two USB Conectors. How can i enable the USB Ports? Units connected to the USB will not work.

I need the USB port for the Dongle...

thx
2 REPLIES 2
Highlighted
Honored Contributor

Re: Netserver E50 and USB?

Actually there is no USB controller to run these USB ports. There is no built-in USB functionality on the E50 system board. It is the equivalent to having an external SCSI port but no SCSI controller to actually run it. There's no way to simply attach a USB controller. You can certainly try & install a USB PCI card, for instance, but HP did not test this so we do not know if it will work or not.
Basic system board specs: 440FX chipset. PCI spec: 2.1 Single PCI bus structure.
Highlighted
Frequent Advisor

Re: Netserver E50 and USB?

try upgrading the firmware