Netservers

Netserver LHII please help me

 
Pablo Appezzato
Occasional Contributor

Netserver LHII please help me

Hi i need help, i dont have any idea with this problem. I have LHII with 3 hard drive Seagate Cheetah ST39102LC. How I boot in any this HD? I have only the two embedded AIC-7880. I dont have the Navigator CD for this computer. Any idea?
4 REPLIES 4
e4services
Honored Contributor

Re: Netserver LHII please help me

If the drives are attached to the internal SCSI controller, you should see them reported on the SCSI bus by the controller at POST.
As for installing an OS, which I am guessing is what you mean by How I boot any these HD, a SCSI controller drive is usually required to be loaded at Windows Installation as an additional device driver when it asks you for it, on a floppy
Hot Swap Hard Drives
MStoumba
Frequent Advisor

Re: Netserver LHII please help me

Does your LH II have a raid controller?
Pablo Appezzato
Occasional Contributor

Re: Netserver LHII please help me

OK, in the post say "not scsi boot disk". when I try to install NT4 this dont recognize the HD. why? I attach the ECU print. Thank
Pablo Appezzato
Occasional Contributor

Re: Netserver LHII please help me

Dont have a raid controller. I wont to boot in any of the three hard drive. thank.