Netservers
1748280 Members
3904 Online
108761 Solutions
New Discussion юеВ

Netserver LT 6000r broken handle

 
Andre Ayotte
New Member

Netserver LT 6000r broken handle

The handle that open the main cover and liked to a sensor is boken (sensor too). Is there a way to bypass this sensor or I'll have to buy that part with a new sensor? And if so, can you tell me the fastest way to get that part?

Thanks for advice!
3 REPLIES 3
e4services
Honored Contributor

Re: Netserver LT 6000r broken handle

Oleg Koroz
Honored Contributor

Re: Netserver LT 6000r broken handle

eBay or parts store if HP still support spare parts sale
http://partsurfer.hp.com/cgi-bin/spi/main?sel_flg=modsrch&template=main&cpric=&prodsrch=HP+NETSERVER+LT+6000R

D9143-63016 Top cover handle assembly - Includes handle solenoid assembly
NO LONGER SUPPLIED

eBay only or self repair

TOP COVER
CAUTION Do NOT operate the HP NetServer for more than 60 minutes with any cover
(including power supplies and disk drives) removed. Otherwise, damage to system
components may result due to improper cooling airflow.
However, you can safely remove a cover while the HP NetServer is running to
remove and replace PCI Hot Plug boards. For any other service activity requiring
access to the processor board or I/O board, power down the HP NetServer and
observe all safety precautions.
-----------------
in other words you should have no problem, it might referes only to informational sensor for interlock, however with management software you should be able see alerts or warrnings if there will be some

Oleg Koroz
Honored Contributor

Re: Netserver LT 6000r broken handle

hm, old school ;o)