Top Tools installation on RH 7.2 Linux Systems

[Arturo Acevedo]

Hi,

I have problems at installing hpserver-core on a Linux Netserver LH Pro system. Does anyone know something about it?
I really appreciate.

[Greg Carlson · Accepted solution]

Arturo,

Do you have a remote assistant board or top tools board in the server?

Also the agents for RH7.2 does not show for use w/ the LH Pro.

the supported systems are:
HP Netserver E 60
HP Netserver E 800
HP Netserver LC 2000 u3
HP Netserver LC 2000/LC 2000r
HP Netserver LC 3
HP Netserver LC II
HP Netserver LH 3000 u3
HP Netserver LH 3000/LH 3000r
HP Netserver LH 4/LH 4r
HP Netserver LH 6000 u3
HP Netserver LH 6000/LH 6000r
HP Netserver LH3
HP Netserver LP 1000r
HP Netserver LP 1000r(1.13/1.26/1.40GHz)
HP Netserver LP 2000r
HP Netserver LP 2000r(1.13/1.26/1.40GHz)
HP Netserver LPr
HP Netserver LT 6000r
HP Netserver LT 6000r u3
HP Netserver LXr 8000
HP Netserver LXr 8500
HP Server tc3100
HP Server tc4100


Ciao,
Greg

[Arturo Acevedo]

Updating..............

I want to install Top Tools agents for R.H. 7.2 in a Netserver LH Pro and I had problems installing hpserver-core which is needed before installing Top Tools agents, however, it shows errors. I have checked the list Greg included on the other message.
I think I should use another Netserver architecture which supports Top Tools on RH 7.2. Is that true?

[Greg Carlson]

Arturo,

That would be the recommended and easiest path for you. Otherwise you would have to build your own code for the LHpro. I haven't tried to install the agents on an older box. I've only installed the instant top tools on the LH3000.

Good luck,
Greg

[Rombach]

Hi Greg,

I have a HP Netserver LH 3000 too.

Can i configure email notification for every hardware events, like harddisk error, if i have the top tools ??

And where can i get the top tools today? HP will never sell them.

Regards Michael