Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Netservers
cancel
Showing results for 
Search instead for 
Did you mean: 

netraid - error writing configuration

SOLVED
Go to solution
Chris Ciapala
Trusted Contributor

netraid - error writing configuration

Hi all,
I have 2 LH6000s with one RS12 external storage box in cluster configuration, with Netraid 3-Si in each server as controller for array. Recently I did complete reinstall, with firmware upgrades and boot disks exchange. Now I have 2 36GB internal disks running with integrated Netraid on each server. But, when Im trying to configure RS12, Im getting error. Error is happening when Im trying to configure new array and save configuration, error sounds exaclty as in subject: Error writing configuration. I tried built-in Express Tools and Windows configuration tools. Any ideas what may cause this? All firmware upgrades were fine, I have green LEDs everywhere but it dont want to work...
Thanks for any imput,
Chris
3 REPLIES
Greg Carlson
Honored Contributor

Re: netraid - error writing configuration

Krzysztof,

You mentioned doing a complete reinstall of the NOS. Internal OS drives are on the integrated netraid in the LH6000 and shared storage in the RS/12. For the RS/12, go into ctrl-M, choose correct adapter in objects and adapter. Then clear the configuration on the Netraid 3si w/ the shared storage. Then attempt to recreat the array.

hth,
Greg
Lets Roll!
Chris Ciapala
Trusted Contributor

Re: netraid - error writing configuration

Well, I did that becouse I need to reconfigure RS12. For now I have clear configuration, but still can't save the new one. Is it possible that integrated Netraid and 3-Si are interfering with each other somehow?
Highlighted
Solution

Re: netraid - error writing configuration

You should disable cluster support at your 3Si card to change the configuration. This can be done using the built-in Express tools.
Onces modified the secondary node can be modified by reading RS/12 disk configuration.