Network Attached Storage (NAS) - Enterprise
cancel
Showing results for 
Search instead for 
Did you mean: 

NAS8000 routing issue

 
SOLVED
Go to solution
Highlighted
Saulius_1
Frequent Advisor

NAS8000 routing issue

Hi,

Today I needed to add static route to the NAS8000, and I could not find routing tables changing command or GUI section. Does NAS8000 allow static routing ?

Maybe someone has already solved this issue ?

Saulius
6 REPLIES 6
Vincent Fleming
Honored Contributor
Solution

Re: NAS8000 routing issue

You can use the "invokeSystemTool" command to execute "route" commands.

For example, "invokeSystemTool route add default 1.2.3.4 1"

Please be very careful with this command, as you can damage the NAS8000 if you do something wrong.

Good luck!

No matter where you go, there you are.
Saulius_1
Frequent Advisor

Re: NAS8000 routing issue

It's very interesting, because I'm unable to find any description of this command in the command reference. Why ?

Saulius
Vincent Fleming
Honored Contributor

Re: NAS8000 routing issue

I found it in one of the reference guides that are available for download online from hp.com; offhand, I don't remember which one one.

You can go to hp.com, look up NAS8000 under products/storage, then look for "information library", it should be in there.

good luck,

Vince
No matter where you go, there you are.
Saulius_1
Frequent Advisor

Re: NAS8000 routing issue

Can't find anything like that :(.
Vincent Fleming
Honored Contributor

Re: NAS8000 routing issue

Saulius_1
Frequent Advisor

Re: NAS8000 routing issue

I've got the point :). I was searching in manuals for version of NASOS 1.4.*, and the command was described in 1.5 ones.

Saulius