Network simulator for aruba or proliant switches devices

[david_dc]

Hello Everyone

I am working in a company which working with HP switches, Aruba and Proliant, but I only remember the Cisco commands.

I have installed some networks simulators but the commands are very differents that Aruba commads.

Do you know if there is any network simulator where I can working in an enviroment with Aruba or Proliant switches??

Thakn you a lot

Best regards

David

[parnassus]

Cheers, short answer: there isn't.

Long answer: there isn't a network simulator for HP ProVision NOS (used on most of HP ProCurve switch series) or for Aruba ArubaOS-Switch NOS (based on HP ProVision)...but there are some official well done guides used to learn corrispondence between some Cisco, Comware and ArubaOS-Switch (ProVision) commands...so if you're comfortable with Cisco you will be able to find some like-for-like commands to use into HP/HPE/Aruba environments.

Forget about ProLiant, that's the product line name of some HP/HPE Servers, no reference with Networking.