APA Configuration

[tempsample]

How Can I confirm if APA is configured in server.

when I check with lanscan

I can see

LinkAgg lan900 up.

[Torsten.]

This is already a good indication. Try

# nwmgr -S apa

[tempsample]

OS version is V2. so nwmgr command is not available

[Torsten.]

Try
# lanscan -q

# lanadmin -x -v 900

[Ajin_1]

HI Please refer the below outputs. # lanscan Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI Path Address In# State NamePPA ID Type Support Mjr# 0/1/2/0 0x00226494C435 0 UP lan0 snap0 1 ETHER Yes 119 0/2/0/0/0/0/2/0/0/0 0xD8D385F63A25 2 UP lan2 snap2 2 ETHER Yes 119 0/2/0/0/0/0/2/0/0/1 0xD8D385F63A24 3 UP lan3 snap3 3 ETHER Yes 119 0/1/2/1 0x00226494C434 1 UP lan1 snap1 6 ETHER Yes 119 LinkAgg0 0xD8D385F63A27 900 UP lan900 snap900 4 ETHER Yes 119 LinkAgg1 0x000000000000 901 DOWN lan901 snap901 9 ETHER Yes 119 LinkAgg2 0x000000000000 902 DOWN lan902 snap902 10 ETHER Yes 119 LinkAgg3 0x000000000000 903 DOWN lan903 snap903 11 ETHER Yes 119 LinkAgg4 0x000000000000 904 DOWN lan904 snap904 12 ETHER Yes 119 # lanscan -q 0 2 3 1 900 4 5 901 902 903 904

[Torsten.]

sorrythisisnotreadable.