Operating System - HP-UX
1748198 Members
2717 Online
108759 Solutions
New Discussion юеВ

Re: Auto FTP job isn't working

 
SOLVED
Go to solution
Eric Bakken
Regular Advisor

Auto FTP job isn't working

Hi all,

I'm using the below script to send a file and it stopped working after the host changed the password. The only thing that I can see changed is that the password is now 8 characters instead of 6. I can log in manually just fine. I get a login failed error when i try to use this script. Can anyone help me?

error=`ftp -n -i <open ftp.server.com
user name password
binary
put file1 file2
bye
EOF`

echo "The FTP to server returned the following: $error"


I've tried altering the script in many ways but no luck. I'm wondering if it's a problem with the recieving server. Thanks,

-Eric
8 REPLIES 8
James R. Ferguson
Acclaimed Contributor

Re: Auto FTP job isn't working

Hi Eric:

From your posting, I am going to assume that the password is written as part of the here-document, and hence that you changed it.

Make sure that the here-document's lines (including the EOF marker are flush left without leading whitespace.

Regards!

...JRF...
Suraj K Sankari
Honored Contributor

Re: Auto FTP job isn't working

Hi,

After running the script its failed did you checked the source server's syslog.log what is there ?

Suraj
Eric Bakken
Regular Advisor

Re: Auto FTP job isn't working

I've started getting this message:

Error - incorrect permissions on /dev/tty.
User cannot log in.

-Eric
Eric Bakken
Regular Advisor

Re: Auto FTP job isn't working

I found someone else with the same problem but it doesn't have a resolution. http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1258901

I guess I'm not sure how simply changing the password for an ftp server login would cause this to happen.
Steven Schweda
Honored Contributor

Re: Auto FTP job isn't working

> I found someone else with the same problem
> but it doesn't have a resolution.

Possibly because he never answered the obvious
question:

> Have you looked at the permissions on any of
> the /dev/? Compared
> them between the two systems?

> I guess I'm not sure how simply changing
> the password for an ftp server login would
> cause this to happen.

Nor I. Could be coincidental.
Ganesh Saraf
Occasional Advisor
Solution

Re: Auto FTP job isn't working

Hello Eric,
Can you pls send your OS Version?? I have faced similar problem once. If password contains any special charecter like "@, #, $"
login fails. Try having password without these charecters.

Pls revert if you get solution.
Jim Keeble
Trusted Contributor

Re: Auto FTP job isn't working

It works on my systems.

Might be a timing issue. If so, you might try "expect" as a solution, but you do have to download and compile it, and HP doesn't support it.


http://expect.nist.gov/
Eric Bakken
Regular Advisor

Re: Auto FTP job isn't working

It turns out this was a password issue. We had a special character in the password that was causing problems. Thanks for your help,

-Eric