Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

CDE desktop - How to setup correct DISPLAY environment parameter through PC connection?

stephen peng
Valued Contributor

CDE desktop - How to setup correct DISPLAY environment parameter through PC connection?

Guys,

I am planning to setup a Ignite server-client environment. 

I used Xmanager to get Ignite server CDE environment and started ignite GUI, through PC connection;  When I tried to create client net_recovery archive, I get following error message:

111.jpg

on Ignite server:

#env | grep DISPLAY
DISPLAY=132.121.150.66:1.0

and 132.121.150.66 was the IP address of the PC client.

and /var/opt/ignite/clients/recovery/latest/recovery.log told:

ERROR: The interactive UI failed to start. Check your terminal type.
* User interface completed unsuccessfully.

So, what I should do to approach my goal?

 

 

regards

Stephen

1 REPLY
Dennis Handly
Acclaimed Contributor

Re: CDE desktop - How to setup correct DISPLAY environment parameter through PC connection?

When I use putty, DISPLAY is already set up with localhost:#:0