cancel
Showing results for 
Search instead for 
Did you mean: 

Ethernet ports are not display

Dhananjaya Amarakoon
Regular Advisor

Ethernet ports are not display

Hi Friends

We have problem with Integrity BL860c i2 which is under HP-UX 11i v3. in this blade enclosure contains virtual connector and configure to Integrity BL860c i2. In this case all blade servers working fine expect one. Problem is in ioscan -fnC lan command it display all the lan ports available including (lan0) but when we try to configure it using lanscan or SAM, it won't display lan0. other lan ports are working.

Any suggestions ?

5 REPLIES
Torsten.
Acclaimed Contributor

Re: Ethernet ports are not display

This could be related to the VC configuration or the blade enclosure port assignments.

Check from OA and virtual connect manager.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dhananjaya Amarakoon
Regular Advisor

Re: Ethernet ports are not display

By thinking like that we did following testing.

All other Itanium blade servers are working fine without problem.
When we change this blade to other enclosure bays it also not working.

Other problem is lan0 is showing in ioscan -fnC lan command.
It doesn't come to SAM or lanscan command outputs
Torsten.
Acclaimed Contributor

Re: Ethernet ports are not display

What gives

# nwmgr -g -v -c lan0


Maybe the NIC is broken, so you need a new systemboard.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dhananjaya Amarakoon
Regular Advisor

Re: Ethernet ports are not display

that command display the lan0 as up. but when try to assign ip address to lan0, it says it was busy. Anyway we had to reinstall the OS for some other reason and after that lan0 is working fine.

thanks for the support
Dhananjaya Amarakoon
Regular Advisor

Re: Ethernet ports are not display

.