FC HBA drivers (HP-UX)

[arkie]

Hi,

Where can I get HP-UX 11iv1 driver for HP A9784-60002 PCI/PCI-X Fibre Channel FC/GigE Combo Adapter?

Thanks in advance

[Fabio Ettore · Accepted solution]

Hi,

here:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FibrChanl-01

HTH.

Best regards,
Fabio

[Matti_Kurkela]

http://software.hp.com

Search with "A9784". You'll find two freely downloadable driver packages: GigEther-01 for the GigE side of the card, and a FibrChanl-01 driver package for the FC side of the card.

MK

[arkie]

Where can I get the installation/upgradation instructions as I could not locate that on the links.

In my scenario, driver version B.11.11.12 is already installed. Now I need to upgrade the same to B.11.11.16. Also, where can I get the procedure for firmware upgrades of this FC HBA?

[Duncan Edmonstone]

hmmm if I follow the link fabio posted:

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=FibrChanl-01

I see a set of installation instructions on that page...

how hard did you look?

for fimware see here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=329290&prodSeriesId=421119&prodNameId=421118&swEnvOID=7&swLang=8&mode=2&taskId=135&swItem=ux-36358-2

again, if you look here you will find install instructions.

Duncan

[Horia Chirculescu]

Chrek this link:

https://h20392.www2.hp.com/portal/swdepot/displayInstallInfo.do?productNumber=GigEther-01


Horia.

[arkie]

Hi Fabio Duncan Horia,

Thanks! Sorry for my overlooking. I have got the install instructions