Operating System - HP-UX
1748268 Members
3699 Online
108760 Solutions
New Discussion

Re: FDDI Install Question

 
SOLVED
Go to solution
Alzhy
Honored Contributor

FDDI Install Question

I've just finished a 11.0 Install on an N-Class. Unknowingly, I set it up assuming it has an ethernet connection. It turns out it is connected via FDDI. Is there an easy way to bring in the FDDI driver/config? Does HP have a separate "depot" for the FDDI piece or do I have to re-install the OS from scratch? Should I have someone mount the Install CD and just go through SAM? Another problem is the site is a lights out data center and as much as possible If I can push a depot/driver via my console connection...
Hakuna Matata.
1 REPLY 1
Ron Cornwell
Trusted Contributor
Solution

Re: FDDI Install Question

There is a software depot named FDDI/9000. It will be on one of the application CDs. It loads from swinstall and requires a reboot. You can do it from the lan console as long as you have an internal CD-ROM or another network connection that you can NFS mount the HPUX Apps CD from.