FTP in Integrity OVMS 8.3 Issues

[ugex]

I have 2 integrity rx2660 stand alone with ovms 8.3, I need transfer via ftp between nodes but not let to me.

the network is plain, no table routes are used , user  system, no acl's and no proxys used.

I discover that

when I use edit/tpu or edit/edt or create a file example a.txt,  the files transfer without isuues, good transfer between node A at node B

But if the file was created  $sh sys/out=mine.txt  the file never was transfer, no let to me binary, no plain.

ftp>hash

ftp> put mine.txt node A

ftp>#

I can´t transfer of node A to node B,  no transfer node B to node A

The same file have successfull tranfer from node A or B  to alpha or windows and viceversa.

some one hep to me?

regards

[Edgar Ulloa]

More information

PA01=>show system/out=prueba.txt

PA01=>ftp pan02

220 pant01.ivms.xxxxxx.com FTP Server (Version 5.7) Ready.

Connected to PANT01.

Name (PAN02:system):

331 Username system requires a Password

Password:

230 User logged in.

FTP> set def sys$sysdevice:[acms]

250-CWD command successful.

250 New default directory is SYS$SYSDEVICE:[ACMS]

FTP> bin

200 TYPE set to IMAGE.

FTP> hash

Hash mark printing on (1024/hash mark).

FTP> prompt

Interactive mode on.

FTP> mput prueba.txt

Put PRUEBA.TXT;2 ? [Y or N or Q or G] [Y]: y

200 PORT command successful.

150 Opening data connection for SYS$SYSDEVICE:[ACMS]PRUEBA.TXT;1 (172.18.2.201,55902)

###########################

 Interrupt

Never ending the transfer :(

[Edgar Ulloa]

PA01=>tcpip show version

  HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.7 - ECO 3

  on an HP rx3600  (1.67GHz/9.0MB) running OpenVMS V8.3-1H1

PA02=>

PA02=>tcpip show version

  HP TCP/IP Services for OpenVMS Industry Standard 64 Version V5.7 - ECO 2

  on an HP rx6600  (1.59GHz/12.0MB) running OpenVMS V8.3-1H1

[Edgar Ulloa]

 Have you tried node A to node A?  Have you tried node B to node B?

Yes I did

 was not successfull  Ato A  B to B , same issue

> > PA01=>show system/out=prueba.txt
>
>       dire /full prueba.txt

   Still wondering.


> > FTP> bin
> > 200 TYPE set to IMAGE.
>
>    It's a text file.  Why say "bin"?

Binary only testing, ascii  does not work also

PA01=>show sys/out=algo.txt
PA01=>dir/full algo.txt

Directory DISK$PA01_USERS:[USER1]

ALGO.TXT;1                    File ID:  (2407,135,0)         
Size:           50/64         Owner:    [SYSADMIN,USER1]
Created:    12-JUL-2012 12:31:12.83
Revised:    12-JUL-2012 12:31:12.84 (1)
Expires:    <None specified>
Backup:     <No backup recorded>
Effective:  <None specified>
Recording:  <None specified>
Accessed:   <None specified>
Attributes: <None specified>
Modified:   <None specified>
Linkcount:  1
File organization:  Sequential
Shelved state:      Online
Caching attribute:  Writethrough
File attributes:    Allocation: 64, Extend: 0, Global buffer count: 0, No version limit
Record format:      Variable length, maximum 0 bytes, longest 80 bytes
Record attributes:  Carriage return carriage control
RMS attributes:     None
Journaling enabled: None
File protection:    System:RWED, Owner:RWED, Group:RE, World:
Access Cntrl List:  None
Client attributes:  None

Total of 1 file, 50/64 blocks.
PA01=>

[Edgar Ulloa]

> FTP> hash             ! I never do this.  What happens without it?

The hash is only for show the advance of transaction

> FTP> mput prueba.txt  ! What about "put"?  "get"?

put is only for transfer a one file, mput many files same time, but not works also

> FTP> prompt           ! With "put" or "get", you wouldn't need that.

prompt is when mput is used, not ask avery time (y/n) for transfer

> FTP> set def sys$sysdevice:[acms]     ! Always the same dev:[dir]?

   Have you tried using some other source and destination disks and
directories?

Yes diferent directories, without acl, diferent users same issue :(

   Have you tried using some other system (VMS+TCPIP or other) as the
FTP client?  As the FTP server?  (As both client and server?)  Systems
outside your network?

> Record format:      Variable length, [...]

   Files with other record types (Stream_LF, Fixed-512, ...)?  Sizes?

> Name (PAN02:system):

   Other users?

   Is there any network firewall between these systems?  (I would not
expect a firewall to affect traffic from A to A, or B to B, but what do
I know?)

   Basically, look at _everything_ you're doing, and start changing
things.  (Preferably, one thing at a time.)

   Or, call HP.

If I send to alpha machine send/receive very well, no issues in both directions, the issue is integrity/integrity

Today try also SFTP and same issue :(

Yes I have a mission critical support ticket opened in HP but not answers about this issue :(