fbackup aborts exactly at 2 GB

[siva3492]

I tries to backup the server version 11.11 using fbackup command

command is 

fbackup -0 -v -f /dire1 -i / -c fbackup_config

i tried to take full backup of server.

dire1 has more than 100 gb of free space and / directory has only 20 gb of data.

But backup was aborted exactly at 2GB of data was taken backup by given command

the error is

fbackup(3014): WRITE ERROR: could not write to the output file
fbackup(3004): writer aborting
fbackup(1002): Backup did not complete : Reader or Writer process exit

I tried more than six times. Same error repeated again.

Any one please help me how to overcome this issue. 

P.S. This thread has been moved from HP-UX > sysadmin to HP-UX > networking. - Hp Forum Moderator

[Dennis Handly]

>backup was aborted exactly at 2GB of data was taken

Have you enabled largefiles on the target filesystem?

[siva3492]

I dont know how to do. Beacause target is mounted on linux machine directory. Actually i am doing nfs file transfer 

[Dennis Handly · Accepted solution]

>I am doing NFS file transfer

Can you create a file larger than 2 GB on the Linux side in the filesystem?  Are you using NFS3?

Perhaps these may help:

http://h30499.www3.hp.com/t5/General/Large-files-over-nfs-mount/td-p/5008454

http://h30499.www3.hp.com/t5/System-Administration/NFS-mount-with-largefiles-option/td-p/3113893

http://h30499.www3.hp.com/t5/System-Administration/mount-F-nfs-o-largefiles-Is-it-possible/td-p/3731956

http://h30499.www3.hp.com/t5/System-Administration/largefiles-on-NFS-filesystem/td-p/2930681