Frame error with driver be2net & Emulex OneConnect 10Gb

[Amit_Saha]

Hello All,

Did anyone find the resolution for the subject? I am having similar issue. 

For me, Bonding is configured. I am seeing Frame Error only in one interface. Other one perfectly working fine. Even I can see Frame Error count is grwoing when I do multiple ping to the host using different size. Please suggest if anyone had a resolution.

Few Info for your reference.

Red Hat Enterprise Linux Server release 6.7 (Santiago)
Linux bdhkr002a01i2 2.6.32-573.34.1.el6.x86_64 #1 SMP Fri Aug 12 14:06:58 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux
0c:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 10)

driver: be2net
version: 10.4r
firmware-version: 10.2.377.29

eth3 Link encap:Ethernet HWaddr 00:90:FA:6A:5C:7C
UP BROADCAST RUNNING SLAVE MULTICAST MTU:8800 Metric:1
RX packets:2128233 errors:3248 dropped:0 overruns:0 frame:3164
TX packets:7438077 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:299022624 (285.1 MiB) TX bytes:8418536812 (7.8 GiB)

Did a cable replacement between server to swicth and replace SFP in both side, no luck as of now.