GB Dos Boot Disk (Q57)

[Lee_83]

I am trying to create a DOS boot disk for my DL380 (G3) Server for imaging purposes. I am using the Q57 driver, but this does not seem to support 1000MB link. Is there a DOS network driver for the DL380 that will support 1GB link.

[JohnWRuffo]

Have you looked at these:
http://h18000.www1.hp.com/support/files/server/us/locOsCat/8.html#35

[JohnWRuffo]

I would try to use this driver:
http://h18000.www1.hp.com/support/files/server/us/download/20641.html

Have you looked at these:
http://h18000.www1.hp.com/support/files/server/us/locOsCat/8.html#35

[Lee_83]

The problem was caused by PC-DOS, used MSDOS and MSCLIENT and Server booted and connected to network no problem.

Thanks for the info though.

[Colin Moors]

Hi Lee,

Have you tried Bart's boot disks yet? Good support for nearly all DOS drivers/NICs in a modular format. Free, safe and GPL too!

http://www.nu2.nu/bootdisk/

I have used this to boot ML370 servers and deploy images. It'll take a little tinkering to get it just right, but it's worth it.

Colin

[Mike Meyer_6]

Has anyone come up with a boot disk for a new DL360 G4? I'm having trouble with it. Please let me know if anyone out there has been down this path. Thanks.