Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

HP-UX 11i Version 3 - Commands for Network Administration.

Grande_bart
Occasional Contributor

HP-UX 11i Version 3 - Commands for Network Administration.

Dear All,

 

I have two HP Blade bl860ci2 with cluster and teaming (Virtual IP). Each Balde have one Teaming IP (Virtual IP).

But, I don´t know the reason, one Blade lost the Teaming Conection (Virtual IP).

I need to know the commands in the HP-UX 11i Version 3 SO, how to do to Check The Teaming , How to change, How to Check, How to Test Teaming in the HP-UX 11i. Some Commands that can be useful.

 

Thank you very much.

 

Best Regard

 

GB.

2 REPLIES
Torsten.
Acclaimed Contributor

Re: HP-UX 11i Version 3 - Commands for Network Administration.

You should use nwmgr, examples:

# nwmgr -v -c lan900

# nwmgr -S apa

# nwmgr -g -v -c lan0

etc.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Modris Bremze
Esteemed Contributor

Re: HP-UX 11i Version 3 - Commands for Network Administration.

lanscan [-v]

lanadmin

 

If you use HP Auto Port Aggregation, its documentation can be found here -> http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp...