HPE Community
Operating System - HP-UX
1752458 Members
5965 Online
108788 Solutions
New Discussion

Re: HP-UX 11i Version 3 - Commands for Network Administration.

 
Grande_bart
Occasional Contributor

‎03-20-2012 10:48 AM

‎03-20-2012 10:48 AM

HP-UX 11i Version 3 - Commands for Network Administration.

Dear All,

 

I have two HP Blade bl860ci2 with cluster and teaming (Virtual IP). Each Balde have one Teaming IP (Virtual IP).

But, I don´t know the reason, one Blade lost the Teaming Conection (Virtual IP).

I need to know the commands in the HP-UX 11i Version 3 SO, how to do to Check The Teaming , How to change, How to Check, How to Test Teaming in the HP-UX 11i. Some Commands that can be useful.

 

Thank you very much.

 

Best Regard

 

GB.

0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

‎03-20-2012 11:00 AM

‎03-20-2012 11:00 AM

Re: HP-UX 11i Version 3 - Commands for Network Administration.

You should use nwmgr, examples:

# nwmgr -v -c lan900

# nwmgr -S apa

# nwmgr -g -v -c lan0

etc.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Modris Bremze
Esteemed Contributor

‎03-21-2012 06:17 AM

‎03-21-2012 06:17 AM

Re: HP-UX 11i Version 3 - Commands for Network Administration.

lanscan [-v]

lanadmin

 

If you use HP Auto Port Aggregation, its documentation can be found here -> http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp...

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.