Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

HP UX on 870 i2 Virtual Connect

Jaghoub
Occasional Contributor

HP UX on 870 i2 Virtual Connect

Hello, I have two enclosure, each having a BL 870 i2 installed in bay1 having flex 10 & enclosure is having virtual connect modules installed, OS on both systems is HPUX11.31, the VC configuration is exactly the same on both enclousures where we assigning one vLan for each LOM But from the OS one system is using lan0,lan1,lan8,lan9,lan16,lan17,lan24 & lan25 While the other one is using lan0 till lan7 insequence I need to cluster the 2 systems and I do not know why it is using different LAN addressing. and is it possible to change it ?