Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

How to configure standby LAN on HP UX

Chirag Parikh
Frequent Advisor

How to configure standby LAN on HP UX

Will anyone help on setting up the standby LAN for the primary data IP of HP UX. It should only get active once the primary LAN fail.

 

Regards,

Chirag Parikh.

 

 

P.S. This thread has been moved from HP-UX > General to HP-UX > Networking - HP Forums Moderator 

1 REPLY
Torsten.
Acclaimed Contributor

Re: How to configure standby LAN on HP UX

For 11.31 try

 

# nwmgr -a -S apa -c lan905 -A links=3,4 -A mode=LAN_MONITOR

 

# nwmgr -s -A all --fr cu --sa -S apa

 

for lan3 as primary, lan4 as standby.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!