Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

I can't set up a udp connection to ypbind on host while doing NIS client

VanitaThara
Occasional Visitor

I can't set up a udp connection to ypbind on host while doing NIS client

I have AIX NIS Master server. I am trying to add HPUX machine as a client. When I do /sbin/init.d/nis.client start it gives error
# /sbin/init.d/nis.client start
starting NIS CLIENT networking
starting up the rpcbind
rpcbind already started, using pid: 1101
domainname asia.jci.com
starting up the Network Information Service
starting up the ypbind daemon
FAILURE CODE: 1
calling ypset with 10.32.61.30
Sorry, I can't set up a udp connection to ypbind on host apunsu02.
Checking NIS binding.
Bound to NIS server using domain asia.jci.com.
starting up the keyserv daemon
keyserv already started, using pid: 1151

and If i go to SAM and trying to setup NIS master server IP..its accepting but allowing me enable NIS client.
4 REPLIES
Robert-Jan Goossens
Honored Contributor

Re: I can't set up a udp connection to ypbind on host while doing NIS client

Hi,

Have a look at this doc.

Title: "ypset: Sorry, I can't set up a udp connection to ypbind on host"
Document ID: emr_na-c00930197-2

US
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00930197-2

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en&docId=emr_na-c00930197-2

Regards,
Robert-Jan
Vanita_1
Occasional Contributor

Re: I can't set up a udp connection to ypbind on host while doing NIS client

I am not able to login either to europe or america/asi-pcific site. Can somebody send me the containts of this link.
Dennis Handly
Acclaimed Contributor

Re: I can't set up a udp connection to ypbind on host while doing NIS client

>I am not able to login either to europe or america/asia-pacific site.

Both links were Europe. Change one to use www1.

If you don't have a Support Contract, you can't see the copyrighted info.
scottgillespie
Occasional Visitor

Re: I can't set up a udp connection to ypbind on host while doing NIS client

That's a dead link (the US one).

 

I've been through about 4 forms now, why can't this content just be open to the internet? This really slows me down when I'm troubleshooting. Missing the old ITRC that was searchable/clickable.

 

Regards,

 

Scott