cancel
Showing results for 
Search instead for 
Did you mean: 

LAN cards issue

meekrob
Super Advisor

LAN cards issue

Hi All,

 

im having a LAN cards issue with one of our rx7640 servers. This server has 3 dual port Gigabit Ethernet cards (lan0,1,2,3,4,5) same as another rx7640 server that has the same hardware config.

Suddenly, lans 2,3,4,5 wont show in ioscan output so, after disconnecting all network cables but just leaving lan0 connected and when restarting the server all went back to normal and all lans are shown within ioscan output.

Attached is some info about the server. As seen nic software is CLAIMED for all of them so, in this case how to proceed especially that we can not proceed to restart each time due to critical applications running on this machine.

 

Any help is much appreciated.

 

Thanks in advance

1 REPLY
meekrob
Super Advisor

Re: LAN cards issue

HI All,

 

to clarify the situation, im having the same issue as described in the thread with link below on the forum:

 

http://h30499.www3.hp.com/t5/Networking/TCP-IP-communication-hangs-on-AD337A-adapters/m-p/5165526#M13409

 

so how to temporary set the NICs to promiscuous mode? and as a final solution how to get the new driver posted by Richard ?

 

Thanks in advance