Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

NIC Teaming on Win 2008 Core with Hyper-V

Igor Milavec
Occasional Contributor

NIC Teaming on Win 2008 Core with Hyper-V

Hi.

I have a DL380 G5 with Win 2008 x64 Core and Hyper-V. I have installed the PSP 8.15 and configured teaming. Everything works well if I use the default VLAN. However, when I enable VLAN tagging for Hyper-V child partitions, they are unable to communicate with the network. External switch is a Cisco 2950 with trunking enabled on this port.

Any ideas what could be wrong? It looks to me like HP Teaming driver does not accept VLAN tagged packets from Hyper-V?

Regards, Igor
2 REPLIES
Lmm_1
Honored Contributor

Re: NIC Teaming on Win 2008 Core with Hyper-V

Did you install and configure HyperV before Install NCU? It should be done that way, if it was like that, you should try configuring same VLAN ID´s within the NCU.
Rune J. Winje
Honored Contributor

Re: NIC Teaming on Win 2008 Core with Hyper-V

Found the following info that may be of interest with respect to Hyper-V:

http://support.microsoft.com/kb/950792
http://support.microsoft.com/kb/968703

The sequence of installation is also important: Hyper-V should be installed BEFORE teaming is installed.
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c01663264/c01663264.pdf

http://blog.scottlowe.org/2008/06/23/more-on-hyper-v-and-nic-teaming/

And specifically for VLAN tagging
http://ochoco.blogspot.com/2009/03/disabling-vlan-tagging-in-hyper-v-on.html



Cheers,
Rune