Showing results for 
Search instead for 
Did you mean: 

Nic Teaming HPUX 11.31 VSE OE

Go to solution
Occasional Contributor

Nic Teaming HPUX 11.31 VSE OE

Needing some help regarding at the host level for Nic teaming and or redundancy...... Can you help answer from the OS side? Specifically in regards at the HOST OS layer. In HPUX 11.31 VSE OE... What is the recommended Teaming at this level? Keep in mind this is Virtual Connect flex to the core? Thanks!!
rick jones
Honored Contributor

Re: Nic Teaming HPUX 11.31 VSE OE

You want to look at the writeups for Auto Port Aggregation. That is what HP-UX calls NIC teaming/bonding/trunking/aggregation. I believe but cannot state absolutely that when a VC module is involved, there is no LACP, which means using LAN_MONITOR mode (active standby).
there is no rest for the wicked yet the virtuous have no pillows
Ismail Azad
Esteemed Contributor

Re: Nic Teaming HPUX 11.31 VSE OE

hi dennis,

Well APA is also now part of the Base O.E and as mentioned the terminology you are using is normally associated with other UNICes.

Ismail Azad
Read, read and read... Then read again until you read "between the lines".....
Steven E. Protter
Exalted Contributor

Re: Nic Teaming HPUX 11.31 VSE OE


APA will do the job. You will need to have the switch configured to support it. Unlike Linux network bonding, the switch needs to be configured specifically to support APA.

Configuration guide:

Steven E Protter
Owner of ISN Corporation
Trusted Contributor

Re: Nic Teaming HPUX 11.31 VSE OE

hi dennis

posted into the blade forum regarding your original question.

as mentioned, apa is the ticket but as you specifically mentioned vse and 'host' i assumed you would be considering using integrity virtual machines?