cancel
Showing results for 
Search instead for 
Did you mean: 

Open SNMP Port

mousa535
Occasional Contributor

Open SNMP Port

Hi,

 

how can i open the 161,162 ports on my system 11.31, because i working to configure the IRS on our company.

for that i need to open this

port 162 from managed system and IRS server

port 161 from IRS server to managed system

 

from firewall this done but i still can't access

 

# telnet 19.168.1.50 161
Trying...
telnet: Unable to connect to remote host: Connection refused


# swlist -l product | grep -i snmp

 OVSNMPAgent           B.11.31        HP-UX_SNMP_Agent_Product

 

please your support

Thanks

3 REPLIES
Torsten.
Acclaimed Contributor

Re: Open SNMP Port

The "ManagedSystemsConfigurationGuide" has a chapter about HP-UX servers. You will see it is using WBEM, not SNMP.

Follow the guide!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Patrick Wallek
Honored Contributor

Re: Open SNMP Port

In order for a port to be open there must be some process running that is listening for a connection on that particular port.

 

If there is no process running then it doesn't matter what you do, that port will not be "open".

Torsten.
Acclaimed Contributor

Re: Open SNMP Port

As said, you need the WBEM and diagnostics (SFM) bundle. Get it from http://software.hp.com

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!