1748200 Members
3684 Online
108759 Solutions
New Discussion юеВ

PPP not working

 
Kenneth_4
Occasional Contributor

PPP not working

Why is it that after I have logged on to my HP Unix server through ppp, I am not able to ping or telnet to anywhere from the server? The pppd.log shows all communications are in proper order, and the netstat shows that I am logged on.

But the number of packets for incoming and outgoing is 0.
Ken
3 REPLIES 3
Mark Mitchell
Trusted Contributor

Re: PPP not working

Check the /etc/rc.config.d/netconf file. Out of the box the gatetway is commented out with the # sign. Remove the # sign, and if no one is useing the server restart the network.
/sbin/init.d/net stop
/sbin/init.d/net start

the file entry should look like this ROUTE_DESTINATION[0]=default
ROUTE_MASK[0]=""
ROUTE_GATEWAY[0]=XXX.XXX.XXX.1
ROUTE_COUNT[0]=1
ROUTE_ARGS[0]=""
Kevin Wright
Honored Contributor

Re: PPP not working

I assume you are connected to a modem through PPP right, is so, then what does netstat -nr show you?
what does ifconfig lan0 show,. Are you sure this box is on a network?
Worapoj P.
Regular Advisor

Re: PPP not working

Anyone help me, how to setup PPP on J5000 with local modem

Thanks in advance for your help
Worapoj
For LOVE For Honor For Mankind