cancel
Showing results for 
Search instead for 
Did you mean: 

Perfomance in LANs card

ostapvv
Trusted Contributor

Perfomance in LANs card

Hello all.

How get perfomance in LAN cards?

HP-UX 11.23 IA
I don't have HP OPerations.

6 REPLIES
Uday_S_Ankolekar
Honored Contributor

Re: Perfomance in LANs card


Try some of these commands
nettl or lanadmin or netstat commands.
Good Luck..
Steven E. Protter
Exalted Contributor

Re: Perfomance in LANs card

Shalom,

sar can be used to measure network performance as well.

See: http://www.hpux.ws/system.perf.sh

If you are using APA, there are utilities on the hpux.ws website front page that can get you those figures.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
ostapvv
Trusted Contributor

Re: Perfomance in LANs card

sar can't be used to measure network performance. I known, Sar only for Linux measure network performance.
Kenan Erdey
Honored Contributor

Re: Perfomance in LANs card

Hi,

if you have glance, you can monitor lan performance.
Computers have lots of memory but no imagination
Jose Mosquera
Honored Contributor

Re: Perfomance in LANs card

Hi,

The lanadmin command could be useful to audit NICs statistics (eg: inbound/outbound packets behavior -discards, errros, collisions-, etc). Also you can check current NICs configuration values (eg: card type, MTU size, speed, MAC, status, etc). Detailled info "man lanadmin".

#lanadmin -g
Where corresponds to a LAN interface card. It defaults to the first LAN interface encountered in an internal list. Appropriate values can be displayed with the lanscan command at "Card Instance Number" column (see lanscan(1M)).

Rgds.
ostapvv
Trusted Contributor

Re: Perfomance in LANs card

Thanks all! I use Glance and Perf manager.
lanadmin don't save statistic ((