Problem in Configuration the Sendmail in HP-UX 11.11

[DongIn Ryu]

Dear Sirs;

We are using sendmail email server on HP-UX B.11.11
I have installed the product "SMAIL-UPGRADE B.11.11.02.001 sendmail(1m) 813 special release upgrade"
I want that using SMTP AUTH from sendmail.

Please suggest
Thanks

[Adisuria Wangsadinata_1]

Hi,

What's the problem when you configure the sendmail on HP-UX 11.11 ? Can you post the error message when the problem happened ?

May I know where you get the "SMAIL-UPGRADE B.11.11.02.001 sendmail(1m) 813 special release upgrade" ?

Check the url below about 'Sendmail 8.X Cookbook' :

http://www1.itrc.hp.com/service/iv/docDisplay.do?docId=prodITRC/DE_SW_UX_sendmail_EN_01_E/sendmail.doc

Hope this information can help you.

Cheers,
AW

[LiPEnS]

Hi
Check the sendmial compilation wth command:
#sendmail -d0.12 -bt < /dev/null
if line "Compiled with:" include SASL that is OK. You must only configure in sendmail.cf AuthMechanisms.
http://docs.hp.com/en/5991-0707/ch02s07.html

Regards

[Adisuria Wangsadinata_1]

Hi,

Below is the useful url's for sendmail :
http://www1.itrc.hp.com/service/iv/node.do?node=prodITRC%2FWW_Start%2FN1%7C20%7C5%7C3%7C12%7C2

Hope this information can help you.

Cheers,
AW

[DongIn Ryu]

OK