Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

The device, \Device\Scsi\cpqcissm1, did not respond within the timeout

SHAMINDA ILLANGANTILAKA
Occasional Visitor

The device, \Device\Scsi\cpqcissm1, did not respond within the timeout

Hi,

I'm geting below 2 error's on my DL380 G4 NAS with 2 x MSA20's

============================================
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 9
Date: 9/13/2005
Time: 1:41:22 PM
User: N/A
Computer: LANDO
Description:
The device, \Device\Scsi\cpqcissm1, did not respond within the timeout period.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

=========================================
Event Type: Error
Event Source: cpqcissm
Event Category: None
Event ID: 117
Date: 9/13/2005
Time: 1:41:20 PM
User: N/A
Computer: LANDO
Description:
The driver for device \Device\Scsi\cpqcissm1 detected a port timeout due to prolonged inactivity. All associated busses were reset in an effort to clear the condition.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
================================

Pls help us to fix it...
1 REPLY
iwsec
Occasional Advisor

Re: The device, \Device\Scsi\cpqcissm1, did not respond within the timeout

Hi,
Cpqcissm is used by the 6i smart array in the server. This error seems to indicate that your 6i smart array is faulty.
When you boot up the server are you able to enter the array configuration (F8) ? If not then you need to get it replaced.

Hope that helps,

Cheers
www.iwsec.co.uk
www.vulnerability-scans.co.uk