Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to configure hp-ux 11.31 as router to communicate between two different networks

Abhilash_CMS
Occasional Advisor

Unable to configure hp-ux 11.31 as router to communicate between two different networks

Hi All,
       I am trying to connect  two different subnets using hp-ux system in the middle as a router. Following is IP details of my configuration
      server1 : 192.2.170.100     

      server2 ( Router ) :                                           

                                             192.2.170.207 ( lan900 )                                           

                                             10.10.10.207   ( lan2 )     

       server3 : 10.10.10.206
   

      After doing the necessary Lan connectivity , i am able to  ping "192.2.170.207"  from Server3 by adding the following route entry in Server3


    route add 192.2.170.207 10.10.10.207  1

 

     But i am not able to reach  Server1 from  Server3 , which means i am not able to  ping  "192.2.170.100"  from Server3.

 

     Pls note ,  Server1 IP ( 192.2.170.100 ) is pinging from  Server2.

 

     Pls find the attached Route entries for each hosts.

 

Kindly let me know if anyone has any clue, how to do this connectivity,

 

Thanks in Advance

Abhilash

 

1 REPLY
Laurent Menase
Honored Contributor

Re: Unable to configure hp-ux 11.31 as router to communicate between two different networks

Did you add the reverse root from server1?

on server 1

route add 10.10.10.206    192.2.170.207 1

 

Else you will need to get an nic layer trace on the 3 servers. (nettl)