Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

WIN2008 R2: OpenPegasus Connect is failing

Anmol Rastogi
Occasional Contributor

WIN2008 R2: OpenPegasus Connect is failing

I have windows 2008 R2 on my HP server and i installed HP SIM agent version 8.26. I have installed HP WBEM provider on the same machine and its version is 2.6 for WIN2008 R2.
I developed a CIM client using OpenPegasus but when i try to connect with this machine i am always getting the excpetion "CQHMClient::Connect() Failed to connect to 10.99.126.95".
My question are :
1. Will OpenPegasus will work against the HP agent or is there anything do we need to install?
2. Do HP windows agent provides the support for WBEM?
3. Is there anyone who configured the HP agent for WBEM. Could you please help me with this?

Thanks in advance!

Regards,
Anmol R
1 REPLY
Steven E. Protter
Exalted Contributor

Re: WIN2008 R2: OpenPegasus Connect is failing

At a command prompt
netstat -an

That will list the ports listening.

make sure your app is trying to connect to the right port.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com