Want APA failover group with two IP addresses assigned to it

[Henry Cheung]

In the Auto Port Aggregation Administrator's Guide, I read

"The failover group can have one or more IP addresses assigned to it"

However, there is not an example in the whole guide on how to do this.

Do I just add the2nd address as a logical interface in /etc/rc.config.d/netconf   to the active primary interface ?

Or do I add the 2nd  logical address in /etc/rc.config.d/netconf  to the failover interface ?

Thanks in advance

[Modris Bremze]

Virtual interfaces to HP APA interfaces (e.g. lan900:1) are added the same way as with standard interfaces.