cancel
Showing results for 
Search instead for 
Did you mean: 

apa connectivity problem

Kenan Erdey
Honored Contributor

apa connectivity problem

Hi,

Recently we issued a connectivity problem with a server(hp-ux 11.11 rp8420) apa was not working. i could ping the ips in the same subnet. but cannot ping gateway(sw cluster ip). i tried to ping switch ips that forms gateway ip, i could ping only one of them. so we disabled one port of the port channel now it's working. What can be the problem ? anybody who encounters any situation like this ?

i am writing configuration data here.
thanks.

# ioscan -fnC lan
firat: # ioscan -funC lan
Class I H/W Path Driver S/W State H/W Type Description
=====================================================================
lan 0 2/0/0/1/0 igelan CLAIMED INTERFACE HP A7109-60001 PCI 1000Base-T Core
lan 1 2/0/10/1/0 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 2 2/0/10/1/1 iether CLAIMED INTERFACE HP A7012-60601 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 3 2/0/12/1/0 btlan CLAIMED INTERFACE HP A5230A/B5509BA PCI 10/100Base-TX Addon
/dev/diag/lan3 /dev/ether3 /dev/lan3
lan 4 3/0/0/1/0 igelan CLAIMED INTERFACE HP A7109-60001 PCI 1000Base-T Core
lan 5 3/0/10/1/0 iether CLAIMED INTERFACE HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 6 3/0/10/1/1 iether CLAIMED INTERFACE HP A7012-60001 PCI/PCI-X 1000Base-T Dual-port Adapter
lan 7 3/0/12/1/0 btlan CLAIMED INTERFACE HP A5230A/B5509BA PCI 10/100Base-TX Addon
/dev/diag/lan7 /dev/ether7 /dev/lan7

# lanscan -q
0
5
7
1
3
900 4 // 0 was here
901 2 6

hp_apaconf:
HP_APA_INTERFACE_NAME[0]=lan900
HP_APA_LOAD_BALANCE_MODE[0]=LB_MAC
HP_APA_HOT_STANDBY[0]=off
HP_APA_GROUP_CAPABILITY[0]=5
HP_APA_KEY[0]=
HP_APA_MANUAL_LA[0]=0,4
#
hp_apaportconf:
HP_APAPORT_INTERFACE_NAME[0]=lan0
HP_APAPORT_GROUP_CAPABILITY[0]=5
HP_APAPORT_PRIORITY[0]=0
HP_APAPORT_KEY[0]=
HP_APAPORT_SYSTEM_PRIORITY[0]=0
HP_APAPORT_COLLECT_MAX_DELAY[0]=
HP_APAPORT_CONFIG_MODE[0]=MANUAL
#
HP_APAPORT_INTERFACE_NAME[1]=lan4
HP_APAPORT_GROUP_CAPABILITY[1]=5
HP_APAPORT_PRIORITY[1]=0
HP_APAPORT_KEY[1]=
HP_APAPORT_SYSTEM_PRIORITY[1]=0
HP_APAPORT_COLLECT_MAX_DELAY[1]=
HP_APAPORT_CONFIG_MODE[1]=MANUAL

switch is cisco 4510. etherchannel is enabled on ports.

Computers have lots of memory but no imagination