Networking
All Networking boards are read-only. Please visit https://community.arubanetworks.com/discussion to start a discussion
1753759
Members
4568
Online
108799
Solutions
Latest Articles and Discussions
modem sound
Posted to: Switches, Hubs, and Modems
05-08-2004 I use a compaq nx9000 notebook with a Conexant 56k AClink modem. On first installation, my modem worked perfectly and I could hear its sound while connecting to the Net. But after a second insta ...
0
Kudos
313
Views
1
Reply
Questions about HP Gigabit Network adapters
Posted to: Switches, Hubs, and Modems
05-07-2004 I know that HP-UX 11i 11.22 supports the following 1000BaseT network adapters:A4929A, A6825A, A6794A, A8685AWhat I want to know is what NIC Controllers (i.e. intel 82540, Broadcom..., etc) are us ...
0
Kudos
713
Views
2
Replies
NC6000 Wireless Connection
Posted to: Communications and Wireless
05-06-2004 I have a batch of three NC6000s purchased about two months ago. I've only just come to realise that the wireless cards on them are not functioning.I've pressed the Wireless button above the keyb ...
0
Kudos
877
Views
7
Replies
Mode conditioning patch cord
Posted to: Switches, Hubs, and Modems
05-06-2004 If I use 50/125 micron multimode optical fiber cables to transport LX laser pulses (1300nm) - do I still need mode conditioning patch cords on Tx ports of the LX transceivers? Or are these patch ...
0
Kudos
5558
Views
2
Replies
9308 - 2848 / QoS for
Posted to: Switches, Hubs, and Modems
05-05-2004 Has anyone an config example for configuringQoS between 9308 and 2848?And are there any debug commands to check its working.VLAN 3 is used for VoIP and should have higher priority than other VLAN ...
0
Kudos
310
Views
1
Reply
Wireless not working on NC6000
Posted to: Communications and Wireless
05-05-2004 I have just received a nice new nc6000The wireless software has been installed.The Zero Wireless Config service is started but still I can not get my laptop to see any wireless networks.If I use ...
0
Kudos
737
Views
3
Replies