ipv6 prerequisiste

[merieux]

Hi ,

I search to know what are the prerequisites for IPV6 ? What are the patch , bundle needed to be sure that my system will be IPV6 compliant ?


Is 11iV3 is always fully ipv6 compliant ? or it depend of which packages are installed on the system ? You will find below some information about my system :

Thank you for you help .
Regards ,

# swlist IPv6NCF11i
# Initializing...
# Contacting target
ERROR: Software "IPv6NCF11i" was not found on host

# swlist | grep -i ipv6
HPUX-RAMD B.11.31 HPUX IPv6 routing Server

# swlist -l fileset | grep -i ipv6
# DHCPv6 B.11.31 IPv6 Dynamic Host Configuration protocol daemons and utilities
DHCPv6.DHCPV6-AUX B.11.31 IPv6 Dynamic Host Configuration Protocol utilities configuration and scripts
DHCPv6.DHCPV6-RUN B.11.31 IPv6 Dynamic Host Configuration Protocol daemons
# RAMD B.11.31 IPv6 routing protocol daemons and utilities
RAMD.RAMIPV6-AUX B.11.31 IPv6 Route Administration Manager utilities configuration and scripts
RAMD.RAMIPV6-RUN B.11.31 IPv6 Route Administration

# swlist -l product | grep -i ipv6
DHCPv6 B.11.31 IPv6 Dynamic Host Configuration protocol daemons and utilities
RAMD B.11.31 IPv6 routing protocol daemons and utilities



Thank you for you help .
Regards ,

[Robert-Jan Goossens_1 · Accepted solution]

Hi,

Have a look at this page.

https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=T1306AA

Regards,
Robert-Jan

[merieux]

tahnk you for your reply