lan2 autonegiotion off

[Deeos]

Hi everyone,

I am working on my server facing error of lan2.
Here, I have attached output of lan interfaces.
Please look over output and let me know how to resolve this problem.


...............................................
amdb01#lanadmin -x 2
The link is down. The speed and other link state information
are undefined. The configuration specified for this card is:
Speed = 1000 or 100 or 10 Mbps.
Autonegotiation = On.

amdb01#lanscan
Hardware Station Crd Hdw Net-Interface NM MAC HP-DLPI DLPI
Path Address In# State NamePPA ID Type Support Mjr#
0/4/2/0 0x001A4B0728E2 1 UP lan1 snap1 1 ETHER Yes 119
0/2/1/0 0x0018FE2D15DF 4 UP lan4 snap4 2 ETHER Yes 119
0/4/2/1 0x001A4B0728E3 2 UP lan2 snap2 3 ETHER Yes 119
0/5/1/0 0x0018FE2D6860 5 UP lan5 snap5 4 ETHER Yes 119
amdb01#linkloop -i 2 0x001A4B0728E3
Link connectivity to LAN station: 0x001A4B0728E3
error: expected primitive 0x30, got DL_ERROR_ACK
dl_error_primitive = 0x2d
dl_errno = 0x04
dl_unix_errno = 57
error - did not receive data part of message
amdb01#uname -a
HP-UX amdb01 B.11.23 U ia64 2321177401 unlimited-user license
amdb01#osinfo
OperatingSystem Information
Host: amdb01
Name: HP-UX
Version: B.11.23
UserLicense: Unlimited user license
Number of Users: 1 users
Number of Processes: 159 processes
OSCapability: 64 bit
LastBootTime: May 19, 2010 0:04:36 (00530)
LocalDateTime: Jun 1, 2010 11:26:18 (00530)
SystemUpTime: 1164102 seconds = 13 days, 11 hrs, 21 mins, 42 secs

[Torsten.]

The link is down.
Could be a NIC/cable/switch problem.

[Deeos]

how could i recognise? it's nic card problem or switch problem.

[Torsten.]

Use different port on switch and a different cable.

[Deeos]

hi
I have checked cable with another lan card.
cable is okay. and port is also fine.

[John Guster]

is the port activated yet?

[rick jones · Accepted solution]

Like any self-respecting Gigabit Ethernet interface, your lan2 interface has auto-negotiation enabled - as well it should :)

Can you tell us more about this switch? It is hardcoded in some way? If you have a loopback hood, you might connect that to the lan2 interface's port and see if it reports link up. If it does not, then the card is at least partially broken and may need to be replaced.

[Deeos]

issue is in lancard itself...


thread closed