nc7170 can't connect to Cisco 4006 at 1000T

[Stephen Grantham]

We have tried using this dual port GIG ethernet card in the ML570 and ML370 and at best we can only connect at 100MB. I've tried manually setting the speed to 1000T on both the switch and the NIC, but it didn't make any difference. Any suggestions?

Steve

[Roger Faucher]

Steve:

There are quite new drivers for the 7170. You didn't mention your OS or variant of the ML570, so I suggest you go here: http://welcome.hp.com/country/us/en/support.html
then enter ML570 and click on the radio button for drivers and software. Then you'll have to select your 'submodel', followed by your OS, at which point you should be able to scroll down to the NIC drivers.

While you're there, look around to see if there are any other downloads that seem appropriate.

Hope this helps.

Roger

[Roger Faucher]

Steve:

Did you ever resolve your problem?

Roger