Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

network redudancy

madhuca-
Occasional Advisor

network redudancy

Hi 

How to find the NW redudancy in HP UX machine.

below is the netstat -in command. 

# netstat -in
Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Coll
lo0 32808 127.0.0.0 127.0.0.1 198321509 0 198321808 0 0
lan1* 1500 none none 27 0 7 0 0
lan0 1500 121.96.115.0 121.96.115.26 63620712 0 62985456 0 0
lan9 1500 10.92.142.0 10.92.142.26 143 0 83 0 0
lan8 1500 10.92.154.0 10.92.154.148 2803396 0 2714345 0 0
lan17 1500 192.168.158.0 192.168.158.60 15958424 0 20491768 0 0
lan16* 1500 none none 0 0 0 0 0
lan25* 1500 none none 0 0 0 0 0
lan24* 1500 none none 0 0 0 0 0

I want to know if lan0 got failed. will  NW will be down or will it move to redudant lan available which is marked with "*."

I have checked with lanscan -q and don't see any APA used.

I want to confirm if there is redundancy ?

 

 

1 REPLY
Torsten.
Acclaimed Contributor

Re: network redudancy

Without APA you probably don't have any redundancy (except it is managed by serviceguard somehow).


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!