Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

nfs mounting

himacs
Super Advisor

nfs mounting

Hi Admins,

 

I want to nfs mount from hpux 11.31 solaris. Configuration done ,but  mounting is failing in solaris . Log file show solaris not able to connect source server. I think ports are not open in firewall.

 

Please guide me which ports should to be opened in firewall level  .

 

And i think i need to modify /etc/default/nfs with port details.

 

Please suggest

 

Server : HPUX 11.31

 

Regards

himacs

1 REPLY
Highlighted
pradeep m
HPE Pro

Re: nfs mounting

HP-UX 11.31 allows you to specify a port number for the nfs services by adding a variable to the /etc/default/nfs file. This may be helpful for configuring NFS and you need to know what ports to open to allow traffic through a firewall or other packet filtering device. rpc.mountd , rpc.statd and rpc.lockd are the most common ones you would configure for HP-UX 11.31 NFS V2 or V3.

 

The following is an example of the syntax for specifying a port for rpc.mountd :


MOUNTD_PORT=15002 

After the nfs services are started, you should see the following:


# rpcinfo -p | grep mountd 
    100005    1   udp  15002  mountd 
    100005    1   tcp  15002  mountd 
    100005    2   udp  15002  mountd 
    100005    2   tcp  15002  mountd 
    100005    3   udp  15002  mountd 
    100005    3   tcp  15002  mountd

 

 

Notice that by default, and as long as the port numbers have not been assigned in the /etc/default/nfs file, the port numbers will continue to be allocated at random. 

 

Regards,
Pradeep

I am an HP Employee
A quick resolution to technical issues for your HP Enterprise products is just a click away HP Support Center Knowledge-base
See Self Help Post for more details