Operating System - HP-UX
1748195 Members
4649 Online
108759 Solutions
New Discussion

setting up NTP clients from GPS receiver

 
NDO
Super Advisor

setting up NTP clients from GPS receiver

Hi All

 

Please I have a number of servers, some of them running HP-UX, 11.23 others 11.31 and two solaris 10 servers.

But I was given a "Symmetricom NTS-200 Network Time Serve " . This product according to the other guys in the department is already setup. So to setup clients what I would  have to do will be only to add entries in the /etc/rc.config.d/netdaemons file and in the /etc/ntp.conf file, like:

NTPDATE_SERVER=< IP ADDRESS>

XNTPD=1

XNTPD_ARGS=

 

Then edit /etc/ntp.conf

 

add

server < ip address of NTP server>

 Is That all?

 

FR


2 REPLIES 2
Patrick Wallek
Honored Contributor

Re: setting up NTP clients from GPS receiver

That is correct, yes.

Ozer YUMSEK
Occasional Advisor

Re: setting up NTP clients from GPS receiver

hi,

 

You should check /etc/TIMEZONE file. Carefull about the file. That can cause time errors.

 

Regards