cancel
Showing results for 
Search instead for 
Did you mean: 

subnet

SOLVED
Go to solution
Shivkumar
Super Advisor

subnet

Hi,

What is the command to find the subnet (not subnet mask) on windows operating system ?

Thanks,
Shiv
3 REPLIES
Ivan Ferreira
Honored Contributor

Re: subnet

If you want to know what is your network (all hosts bits set to 0) based on the subnet mask, you can use:

route print
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
Preston_Capgemini
Occasional Advisor

Re: subnet

or did you want the simple answer or IPCONFIG /ALL
Edgar Zapata
Esteemed Contributor
Solution

Re: subnet

Hi,

check the last Q under http://support.microsoft.com/kb/102908/en-us
This may shed some light.
In any case, I don't know of any command that will tell you the actual subnet you're in.
To find out this, you need your IP address in conjunction with your subnet mask.
You need a subnet calculator.
There are several ones on the Internet.

I use any of the following:

On-line:
http://www.subnet-calculator.com/

Software: http://ftp.wildpackets.com/pub/goodies/ipcalc321.exe

Hope it helps.
Tnks.