telnet problem

[Darren Poh_1]

the telnet is slower than usual, sometimes i even got timed out at the checking disk quota. there is no disk quota setting in the system. how can i resolve this?

[Ravi_8 · Accepted solution]

Hi

check lan setting, whether it has been set to Half duplex and Full duplex,

#lanadmin

[bhavin asokan]

hi,

see any of the filesystem is full.
are you receiving any messages like 'source quench received' while pinging or accessing to server.

regds,

[Darren Poh_1]

how do i check whether is it full-duplex? i use lanadmin and under lan and display, there is no indication of it

[bhavin asokan]

hi,

use sam

sam--networking and communications--network interface cards --select the lan card ---actions --modify it will show full/half duplex

regds,

[Ravi_8]

Check the card as told by Bhavin, if card is set to half duplex, make it full duplex and vice versa

you can do the same using commands "lanadmin -->lan -->display
first line will show speed and h/d or f/d
if card is h/d, set it to f/d
#lanadmin -X 100FD

if card is f/d,set it ot h/d
#lanadmin -X 100HD

ppa number can be found using lanadmin, check for options that lanadmin shows

[Darren Poh_1]

hi
i try the sam but sam did not show the duplexity..i guess this is not important..
i trying to find out the filesystem.

regards.

[Darren Poh_1]

hi ravi

both method i tried, i could not see whether the lan's duplexity, the 1st line in the lanadmin is ppa number and is 0... what do i do?

regards

[Ravi_8]

post the o/p of

lanadmin-->lan-->display

[Darren Poh_1]

hi

what is o/p??