Networking
cancel
Showing results for 
Search instead for 
Did you mean: 

telnetd[nnnnn]: getpid: peer died: Error 0 [ New ]

Rahul85
Occasional Contributor

telnetd[nnnnn]: getpid: peer died: Error 0 [ New ]

Dear Seniors/Colleagues,

 

I am experiencing problems with telnet sessions running on radio frequency terminals(scanners) connecting to HPUX 11.31 using telnet protocol. Every now and then a telnet session is terminated even though radio coverage is good. Are ther any parameters i should be looking to change? syslog is attached for info.

 

[root@WAPP:/]#kcusage
Tunable Usage / Setting
=============================================
filecache_max 175988736 / 193983856
maxdsiz 46415872 / 1073741824
maxdsiz_64bit 197132288 / 2147483648
maxfiles_lim 525 / 63488
maxssiz 1179648 / 134217728
maxssiz_64bit 21331968 / 1073741824
maxtsiz 7249920 / 100663296
maxtsiz_64bit 2019328 / 1073741824
maxuprc 217 / 3686
max_thread_proc 252 / 1024
msgmni 2 / 4096
msgtql 0 / 4096
nflocks 46 / 4096
ninode 2145 / 34816
nkthread 1615 / 7184
nproc 599 / 4096
npty 0 / 400
nstrpty 14 / 400
nstrtel 93 / 400
nswapdev 1 / 32
nswapfs 0 / 32
semmni 18 / 4096
semmns 136 / 8192
shmmax 19023768 / 1073741824
shmmni 9 / 4096
shmseg 3 / 512


Thanks
MAK