HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Nimble Storage Solution Specialists
cancel
Showing results for 
Search instead for 
Did you mean: 

How SATA(HDD) and SSD disks works

 
Pacifique
Occasional Visitor

How SATA(HDD) and SSD disks works

Hello guys  i would like to know How SATA(HDD) and SSD disks are being used. and please tell me how more load and capacity the SSD disks should have to avoid overloading the SSD disks. your help will be much appreciated.

2 REPLIES

Re: How SATA(HDD) and SSD disks works

Are you wanting to know how HDD and SSD is being used within the Nimble CASL filesystem?  I am a little unclear on the question.

When sizing a Nimble CS array, be sure to have ~10% Flash-to-Disk ratio between the SSD and HDD.  For example, an array with 100TB useable HDD space should have 10TB of SSD.  It's best to engage your local sales team to ensure the array is properly sized and configured.  

Patrick Miller | Hewlett Packard Enterprise Employee
Solutions Architect – Storage & Hybrid IT

Register a Kudo by clicking the thumb if this helped in your issue.
Please consider marking it as an Accepted Solution if issue is resolved.
Roland Kudelic
Occasional Advisor

Re: How SATA(HDD) and SSD disks works

10% is correct. On our CS500 it looks lite this:

HDD   15 TiB Usable (21.8 TiB / 24 TB Raw)    Cache   2.2 TiB Usable (2.2 TiB / 2.4 TB Raw)

Regards
Roland