Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
Operating System - Microsoft
Showing results for 
Search instead for 
Did you mean: 

DL380p G8 RAID 1+0

Go to solution
Occasional Advisor

DL380p G8 RAID 1+0

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C:  RAID 1

D: RAID 1+0

E: RAID 1+0



Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:


IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5


Am I going to have to download all the drivers into a separate USB and do a manual install ?

Occasional Advisor

Re: DL380p G8 RAID 1+0

Is this even possible?
Occasional Advisor

Re: DL380p G8 RAID 1+0


I was apparantly brain dead yesterday