Simpler Navigation coming for Servers and Operating Systems
Coming soon: a much simpler Servers and Operating Systems section of the Community. We will combine many of the older boards, and you won't have to click through so many levels to get at the information you need. If you are looking for an older board and do not find it, check the consolidated boards, as the posts are still there.
Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

DL380p G8 RAID 1+0

SOLVED
Go to solution
HFMike
Occasional Advisor

DL380p G8 RAID 1+0

Hiya All,

New to these servers.

I'm trying to set up a Win 2008 Enterprise R2 Server

I'm going through the 'Intelligent Provisioning' to set this up

I set up my arrays as the guys want it

C:  RAID 1

D: RAID 1+0

E: RAID 1+0

F: RAID 0

 

Problem I have is that if I configure all the drives as above, using either Recommeded or Customized then setup always tries to install to D:

 

IF I configure only the array that will be C: and do the install, it works until I go and setup the rest of the arrays - once I boot up into Windows I get prompted to initialize the other drives and am faced with only RAID 0, 1, or 5

 

Am I going to have to download all the drivers into a separate USB and do a manual install ?

2 REPLIES
HFMike
Occasional Advisor

Re: DL380p G8 RAID 1+0

Is this even possible?
HFMike
Occasional Advisor
Solution

Re: DL380p G8 RAID 1+0

Nevermind

I was apparantly brain dead yesterday