Detection method for ILO firmware version using SCCM

[manojmallik]

Hi Forum

I am planning to update all my Gen8/Gen9 servers ILO firmware to 2.80 .Can someone tell me how to use a detection method in SCCM ? Is there a specific file  or file properties that can tell me the firmware is updated to 2.80 version?

[support_s]

System recommended content:

1. Advisory: HPE Integrated Lights-Out 5 (iLO 5) - Firmware Upgrade to iLO 5 v2.35(a) from iLO 5 v1.48 May Not Function Using iLO 5 Web Interface

2. Advisory: (Revision) HPE Synergy 480 Gen10 Plus Compute Modules - Redfish Device Discovery May Fail For An NS204i-d Boot Device When Using HPE Integrated Lights-Out 5 (iLO 5) Firmware Version 2.44

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[ManBha]

Hello,

This can be verified from the iLO web interface.

For information in SCCM, you will have to engage the OS vendor.

Thanks.

[manojmallik]

Hi 

I got the path of the existing ILO firmware version

Its Computer\HKEY_LOcal_Machine\System\CompaqPermanent\Host\Component\FirmwareVersionASCII\FWRev009

Now I can put my querry to find if the Value is >=2.80